The pond was used as a sediment pond during construction of the property and once construction was completed, the pond was never scraped out and built to the plan specs.
We ended up removing 380 yards of sediment and then brought in new fill to get the pond back to the correct elevation. There should have been an infiltration trench installed in the pond but it was never installed. This pond is considered a water quality pond due to its size and then drains offsite into another detention pond. We had engineers redesign the infiltration trench since the required depth could not be met and have positive flow.
Once designs were approved for the design change, we dug out the trench, installed our geotextile and set the drain line.
We then backfilled over the pipe with #57 stone and formed a trench down the middle.
Next, we installed the riprap at the inflow structure. Then, we seeded the disturbed areas and covered with coconut fiber. Finally, we installed a silt fence around the rock bed until complete stabilization is achieved.
Install support pole, shrub and tree removal, Trenching, installed approximately 75 ft of conduit and wire from stilling well to control panel, compacted, covered all exposed fill with sod. Stay tuned for more images from day two. Contact DGC Environmental if you need assistance with your stormwater monitoring system in Florida or anywhere within our service area in the Southeast United States. Contact Us
Sediment removal is complete. The site has been surveyed. Now, we discovered that the infiltration trench never installed. And, the pond was graded to the wrong elevation. We are bringing in new fill and using a laser to correctly grade the #pond. We have added additional #BMPs to ensure we do not have any #sediment release and our #turbidity is within compliance. Once the engineers have come up with an approved revision to the trench and low flow orifice, we will be on our way to completing this project. Stormwater systems are at the core of what we do here at DGC. Reach out to us with any questions or concerns you might have with your #stormwater #systems
This parking lot flooded due to a clogged storm drain. By calling our flood cleanup service; the client received rapid response to a dangerous and revenue impacting condition. Our environmental cleanup team arrived on the scene with one very important tool: Our Vac Truck. This vacuum truck (think shop vac on steroids!) was turned-on and immediately cleared the drain. Our team finished the job by clearing all existing sediment.
There are many types of stormwater assets and even more methods for maintaining and repairing them. A Detention Pond is our main focus in this blog post and we will discuss how to remediate a detention pond that is not functioning properly. During and after a storm event, a detention pond collects stormwater that is conveyed to it from somewhere else (usually an impermeable surface close-by). Generally, the water that collects is supposed to drain - or percolate - back into the aquifer within a 72 hour time period. An easy way to remember the difference between a detention pond and a retention pond is after school detention ended and you were let go, whereas retention is a more long term scenario, holding water permanently.
There are a number of reasons why the stormwater in a detention pond might not percolate properly, including improper design and construction, incorrect fill media, and sedimentation - a build up of sediment transported by stormwater. Rectifying all of these issues is very important for the simple fact of safety and flood control. In addition, most regulatory agencies have compliance standards and consistently look for these non-compliant systems to issue Notice of Violations - NOVs. Ensuring your detention pond functions properly will save you money on maintenance and maintaining compliance.
Our case study is an excellent representation of a non-percolating detention pond that totals approximately 4,000 square feet and includes a concrete retention wall. The pond did not drain within the allotted 72hr period, at times became an eyesore due to algal blooms and unwanted vegetation was difficult to maintain for the contractor as they could not mow sod under water. On top of all that, this site was out of compliance and an NOV could have been right around the corner, literally - there is a regional field office for the local water management district less than two miles away from this location.
The processes involved in a project of this scope extend way beyond what one might think and various specialists are involved throughout the entire project. Geotechnical experts are occasionally consulted to provide geological surveys and soil analysis. Engineers and their assessments are consistently relied upon ranging from as-built drawings to any modifications that may need to occur. In the event of a modification to originally designed systems, additional permitting is ALWAYS required and opens the door for regulatory agencies and their involvement. Proper equipment and experienced operators are vital to the success of a project of this nature. Fences and gates are also a common piece of the puzzle that need to be handled accordingly. Unforeseen obstacles such as electric conduit or irrigation systems are always a concern; while ensuring proper trees and sod/seed are specified. Seed is usually preferred to sod due to the sedimentation that naturally collects in the sod at the sod farms.
Once the geotechnical items are handled, excavation can begin. The equipment operators will have been instructed on exactly how much earthwork needs to be done to satisfy the geo-parameters. A specific, predetermined depth is achieved and the foundation is scarified. Again, pre-determined choice of fill is brought in and distributed evenly across the area that has been excavated, careful not to impact the newly laid fill material. Trees are planted, grass seed is distributed and we wait for a rain event to see our handiwork in action!!
In conclusion, it is important to know what kind of stormwater assets you have and how best to maintain them. Detention ponds are meant to percolate back into the earth over a short period of time, and when that process is stagnated the pond needs to be repaired. There are many variables that can comprise the process and a proper plan of action is fundamental in a successful project. In the event that it needs remediating, having knowledgeable, experienced contractors is a very important aspect of the process. DGC Environmental is that knowledgeable, experienced contractor.
Let’s Work Together!
DGC Environmental is the solution to your stormwater problem.